Plumbing Systems

GPW-1000 · شبه احترافي

• 220 VVoltage
• 1000 WPower
• 20/25/32/40/50/63 mmDiameter attachments

Plastic pipe welder for joining pipes and fittings from 20 to 63 mm when installing domestic water supply and heating systems. Simple design, sturdy body and PTFE-coated heating dies.

GPW-1700 · شبه احترافي

• 220 VVoltage
• 1700 WPower
• 20/25/32/40/50/63 mmDiameter attachments

Steel-bodied welder for fusing polypropylene pipes and fittings, with Teflon-coated heating elements. Two heating modes and six welding heads from 20 to 63 mm are included.

GSP-80L · منزلي

• 5 mMax lift height
• 80 l/minPerformance
• 250 WPower

A 250 W sewage pump moving 80 l/min drains showers, washbasins and similar fixtures where a gravity sewer cannot be built. Built for intensive use with no complicated servicing.

GSP-100L · منزلي

• 6 mMax lift height
• 100 l/minPerformance
• 400 WPower

A 400 W sewage pump moving 100 l/min drains hot waste water from washing machines, dishwashers, baths, showers and sinks installed below the main sewer line.

GSP-200L · منزلي

• 9 mMax lift height
• 200 l/minPerformance
• 600 WPower

A 600 W macerating pump moving 200 l/min drains fixtures installed below the main sewer line. The built-in macerator handles solids in the flow, and servicing needs are minimal.

GMK-12 · منزلي

• 1/2 inchDiameter

A seven-piece 1/2" installation kit for fitting heating radiators. Adapters, a bleed valve, a plug and silicone gaskets cover a complete leak-free installation on bimetallic and aluminum radiators.

GMK-34 · منزلي

• 3/4 inchDiameter

A seven-piece 3/4" installation kit for fitting heating radiators, suitable for bimetallic and aluminum units. It gives a reliable, leak-free connection that lasts.

GPTP-10 · شبه احترافي

• 5 lVolume tank
• 1.5 l/minPerformance
• 10 barTest pressure

Hand pressure test pump rated at 10 bar with a 5 liter tank and a gauge: it checks the integrity and strength of closed building systems, and a coarse filter extends its service life.

GBF-1 · منزلي

• 4 mmMin diameter processed hole
• 36 mmMax diameter processed hole
• 0.07 kgNet weight

A universal inside and outside deburring tool for copper, brass, bronze and plastic pipe. An impact-resistant plastic body and hardened tool steel blades give a clean chamfer for an accurate joint.

GCP 25-4-180 · منزلي

• 220 VVoltage
• 72 WPower
• 50 l/minPerformance

Three-speed circulation pump for heating systems with overheat protection, rated for water up to 110 degrees.

GCP 25-6-130 · منزلي

• 220 VVoltage
• 93 WPower
• 55 l/minPerformance

Circulation pump for open and closed heating systems: the wet rotor and overheat protection give it a long working life.

GCP-25-6-180 · منزلي

• 220 VVoltage
• 93 WPower
• 55 l/minPerformance

Circulation pump with three power steps and a wet rotor: simple to set up and able to work even with hard water.

GCP-25-8-180 · منزلي

• 220 VVoltage
• 182 WPower
• 120 l/minPerformance

Monobloc circulation pump with a single-phase three-speed motor and a wet rotor; overheat protection extends its service life.

GCP-32-8-180 · منزلي

• 220 VVoltage
• 270 WPower
• 166 l/minPerformance

Circulation pump for heating systems in houses and buildings of any kind, with a wet rotor and overheat protection.

GPTP-60-3 · منزلي

• 220 VVoltage
• 250 WPower
• 60 barTest pressure

Electric pressure test pump, 60 bar, 250 W, 3 l/min, with a 17 liter tank and a gauge: it tests pipelines, heating and fire-fighting systems and fills closed circuits.

GPTP-60-6 · منزلي

• 220 VVoltage
• 400 WPower
• 60 barTest pressure

Electric pressure test pump, 60 bar, 400 W, with an output of 6 l/min: it leak-tests water supply and heating systems, fills circuits and doubles as a hydraulic drive.