Gasoline snow blower SP-7-610ES

The SP-7-610ES petrol snow thrower combines high output and good functionality in a compact machine, which makes it suitable for owners of large gardens, farms, municipal services and anyone else who has to clear big areas of snow. It has a 7 hp engine and 8 speeds (6 forward and 2 reverse). The clearing width in a single pass is 61 cm and the height is 50 cm. The fuel tank holds 2.3 l.

The enclosed winter-grade engine is protected against hard frost down to -35 °C.

The working element is a metal auger of high-strength steel that picks up and grinds lumps of iced-over snow, crust and ice. Snow is thrown through the chute up to 10 meters; the throw distance can be set in advance and the discharge direction can be adjusted while driving. The machine is maneuverable and stable on slippery ground thanks to a pair of wheels with a deep tractor-type tread. For convenience it has an electric starter powered from a 220 V supply and a powerful headlight.

This engine model is not designed to take an air filter.

For stable starting, reliable operation and a longer service life, we strongly recommend regular maintenance of the snow thrower. This includes a mandatory check and service after purchase, at the end of each winter season and immediately before a new snow-clearing season begins. Inspect all the main assemblies and mechanisms carefully: the engine, the transmission, the augers and the discharge system. Keep in mind that the first start after a long idle period can be harder than usual, because fuel can evaporate from the carburetor and the oil can thicken. Before the first start, always check the oil and fuel levels and let the engine warm up for a few minutes. Preparing the snow thrower properly for long storage matters just as much. Before putting it away for a long period, drain the remaining petrol from the fuel tank and the carburetor to prevent deposits and a clogged fuel system. Check the engine oil level regularly and change it on time, strictly following the manufacturer recommendations in the operating manual. The oil must be changed according to engine hours or elapsed time, whichever comes first. Following these simple recommendations will extend the service life of your snow thrower and keep it working reliably for many years.

• Snow thrower assembled with engine
• Chute rotation lever
• 2 skid shoes
• Control handle with panel, assembled
• Fastener kit
• Product passport
• Packaging